From hazard study to startup, and every shift after.
NOVOPSM covers the full life of process safety on your site: hazards, procedures, permits, changes, people, incidents and audits. Twenty modules, one system, on your own servers.
- 20
- CCPS process safety elements
- 4
- pillars of risk based process safety
- 3
- languages: EN, FR, AR
Why process safety breaks down.
- 01
Scattered records
Studies in one folder, permits on paper, actions in a spreadsheet. Nobody sees the full picture.
- 02
Actions that stall
HAZOP recommendations, audit findings and investigation actions get raised, then forgotten.
- 03
Changes without control
A temporary change stays for months. Training and startup checks happen late, or not at all.
NOVOPSM puts every element in one system, linked to the same assets and the same people.
The 20 elements, each with its own module.
NOVOPSM follows the CCPS risk based process safety model. Every element is a module, grouped in the same four pillars you see on the app’s home screen.
Commit to Process Safety 5
-
Process Safety Culture
Run culture surveys and campaigns, turn the gaps into improvement actions, and give people a confidential Speak-Up channel.
CampaignsAnalyticsCulture GapsLeadershipSpeak-Up -
Compliance with Regulations and Standards
Build the register of rules that apply to each facility, assess compliance, keep the evidence and close the gaps.
RegisterAssessmentsGapsEvidenceMonitoring -
Process Safety Competency
Define the competencies each position needs and see, person by person, who has them and who needs reassessment.
Position MatrixWorkforce MatrixCompetency GapsReassessments -
Workforce Engagement and Involvement
One register of members and companies. Every training, competency, permit and headcount points back to it.
MembersCompanies -
Communication and Transparency with Stakeholders
Write, approve and publish safety communications, then track who has acknowledged them.
RegisterMy communicationsTemplates
Understand Hazards & Risks 4
-
Process Safety Information (PSI)
The asset hierarchy, from site to equipment and lines. Almost every other module attaches its records here.
AssetsComponents -
Hazard Identification and Risk Analysis (PHA)
Run HAZOP and other studies by node and scenario, rate risk on a 5×5 matrix before and after safeguards, and track recommendations.
NodesAnalysisRecommendationsReview & approval -
Operating Procedures
Write procedures with their operating limits and revisions, publish them and collect read and acknowledge.
Procedure contentOperating limitsRevisionsDistribution -
Safe Work Practices (Permits to Work)
Issue permits with their checklist, controls, gas tests and isolations, linked to the assets and the workers involved.
ChecklistControlsIsolation
Manage Risks 7
-
Asset Integrity and Reliability
Plan inspections, tests and maintenance, record findings and follow corrective actions to closure.
Integrity PlansInspectionsTestsFindingsCorrective Actions -
Contractor Management
Prequalify contractors, run site inductions and see which workers are cleared for the job.
PrequalificationsSite inductionsAssignmentsPerformance -
Training and Performance Assurance
Keep the course catalog, run sessions, track certifications and see what is about to expire.
Training CatalogTraining SessionsCertificationsCompliance -
Management of Change (MOC)
Raise permanent or temporary changes with their risk level, route them for approval and follow the actions.
DashboardChange RequestsApprovalsActions -
Pre-Startup Safety Review (PSSR)
Check readiness before startup, close blocking deficiencies and record the startup decision.
DashboardReviewsDeficiencies -
Conduct of Operations
Run shift handovers, rounds and the logbook, and track equipment status and deviations.
HandoversLogbookRoundsEquipment statusDeviations -
Emergency Management
Prepare plans and scenarios, run drills, and manage a live event with its timeline and accountability board.
Emergency eventsPlansScenariosDrillsLessons learned
Learn From Experience 4
-
Incident Investigation
Investigate with a team, evidence, statements and a timeline. Find root causes and failed barriers, then act.
InvestigationsCorrective actionsLessons learned -
Measurement and Metrics
Define KPIs with a formula builder, set targets and thresholds, and follow them on the scorecard.
DashboardScorecardResults -
Auditing
Plan audits, work the checklist, record findings and verify the corrective actions.
AuditsFindingsCorrective Actions -
Management Review and Continuous Improvement
Hold management reviews with inputs from audits, incidents, KPIs, compliance, MOC, PHA, training and emergencies, then track decisions.
ReviewsDecisionsOpportunitiesActions
Where each OSHA element lives.
Working to OSHA PSM? Here is the module that covers each of its 14 elements.
| OSHA element | NOVOPSM module |
|---|---|
| 01Employee participation | Workforce Engagement and Involvement |
| 02Process safety information | Process Safety Information (PSI) |
| 03Process hazard analysis | Hazard Identification and Risk Analysis (PHA) |
| 04Operating procedures | Operating Procedures |
| 05Training | Training and Performance Assurance |
| 06Contractors | Contractor Management |
| 07Pre-startup safety review | Pre-Startup Safety Review (PSSR) |
| 08Mechanical integrity | Asset Integrity and Reliability |
| 09Hot work permit | Safe Work Practices (Permits to Work) |
| 10Management of change | Management of Change (MOC) |
| 11Incident investigation | Incident Investigation |
| 12Emergency planning and response | Emergency Management |
| 13Compliance audits | Auditing |
| 14Trade secrets | No dedicated module. Access to sensitive records is controlled with roles and permissions. |
Run the study method that fits.
Each PHA study picks its methodology. Nodes, scenarios, causes, consequences and safeguards are recorded, and risk is rated on a 5×5 matrix before and after safeguards.
- HAZOP
- What-if
- Checklist
- What-if / checklist
- Preliminary hazard analysis
- Job hazard analysis
- Failure mode review
- Bow-tie
- Severity: Negligible to Catastrophic
- Likelihood: Rare to Almost Certain
- Levels: Low, Medium, High, Extreme
How the work flows through NOVOPSM.
- 1
Identify
Build the asset hierarchy and study hazards by node and scenario.
AssetsPHA - 2
Control
Write procedures with safe limits, issue permits, run shifts and rounds.
ProceduresPermitsOperations - 3
Change
Raise the change, check training, run the pre startup review.
MOCTrainingPSSR - 4
Maintain
Plan inspections and tests, record findings, follow corrective actions.
IntegrityContractors - 5
Learn
Investigate incidents, audit the system, share lessons learned.
IncidentsAuditsEmergency - 6
Improve
Track KPIs on the scorecard and decide in management review.
MetricsReview
What your teams get.
-
Hazards and change
- HAZOP and PHA with initial and residual risk
- Recommendations, completeness checks and revalidation
- Permanent and temporary changes with risk level and approvals
-
Daily operations
- Permits with checklist, controls, gas tests and isolation
- Shift handovers, operator rounds and logbook
- Equipment status, deviations and temporary instructions
-
Assets and integrity
- One asset hierarchy shared by every module
- Integrity plans, inspections, tests and maintenance calendar
- Findings and corrective actions with closure rate
-
People and contractors
- Workforce register with competency matrices
- Training sessions, certifications and expiry tracking
- Contractor prequalification, inductions and work clearance
-
Learning and assurance
- Investigations with evidence, timeline, root causes and failed barriers
- Audits from fieldwork to verified actions
- Emergency events with live timeline and accountability board
-
Oversight
- KPIs with formula builder, targets and thresholds
- Scorecard and module dashboards with attention panels
- Management reviews fed by audits, incidents, KPIs and more
Each module opens on what needs attention.
Modules such as MOC, PSSR, Auditing, Metrics, Asset Integrity and Training open on a dashboard with KPI cards and attention panels.
- Open, pending and overdue at a glance
- Attention panels for what expires or slips
- Pending approvals you can act on directly
- MOC-014 Temporary bypass V-101 6 Days
- MOC-016 Temporary standby pump P-101 12 Days
Built once, shared by every module.
Search and Ask
Ctrl K searches every module. Ask mode understands plain questions with a local model.
Approval rules
Set who approves what, then act from the approval bar and the workflow panel.
Site based access
People see only the sites they are assigned to. Enforced on the server.
Roles and permissions
About 30 industry roles and a role matrix that shows who can do what.
Excel in and out
Import assets, workforce, studies, training and more with column mapping. Export to Excel or PDF.
Notifications
Know when something needs you, from the bell in the top bar.
From install to first permit.
- 1
Install on your servers
NOVOPSM runs in containers inside your network, with its local AI model.
- 2
Load your data
Import your assets, workforce and registers from Excel.
- 3
Set up your sites
Assign people to sites, give them roles and set approval rules.
- 4
Train your teams
We train each role on site, in French, English or Arabic.
Your process safety data stays in Algeria.
- Runs on your own servers, or with an Algerian host you choose.
- The AI model runs locally. Questions and records never leave your network.
- Designed, built and supported by Algerian engineers.
- English, French and Arabic, with right to left layout in Arabic.
Questions we hear.
Which standard is NOVOPSM built on?
The CCPS risk based process safety model and its 20 elements. The table above shows where each OSHA PSM 1910.119 element is covered.
Which hazard analysis methods are supported?
HAZOP, What-if, Checklist, What-if / checklist, Preliminary hazard analysis, Job hazard analysis, Failure mode review and Bow-tie, each recorded by node and scenario.
Do we have to start with all 20 modules?
No. Sites usually start with a few, such as permits, MOC and incidents. The other modules share the same assets and people when you add them.
Can we bring our existing data?
Yes. Import assets, workforce, studies, training, compliance and emergency data from Excel with column mapping.
Does the AI send data outside?
No. Ask mode uses a model that runs on your servers. Most questions are answered by rules without the model at all.
Who supports us?
Our team in Algeria, in the same time zone and in your language.
Photo: Walter Siegmund (CC BY 2.5), via Wikimedia Commons.